
Adrenaline Rush Loudspeaker
The Adrenaline Series ends here. Expanding on the basic design and footprint of the benchmark M-75, the Adrenaline Rush system takes this concept to its highest level. The system employs eight of our low frequency regenerators housed in two dedicated towers almost six feet tall. Benefiting from the low frequency work load being shared among eight woofers, each operates at a fraction of their capability to offer increased power handling, expanded dynamic range, lower distortion and superior timbre discrimination across their driven range. The Adrenaline Rush’s outstanding low frequency reproduction capabilities provide a superior match to our six foot, thin-film planar-magnetic line source via the Active Brain, yielding a compellingly realistic combination of clarity, speed, dynamics, power handling and soundstage. For those discriminating listeners who demand the highest levels of realism and dynamic range, the Adrenaline Rush is designed for you.
Specifications:
| Drivers (Line Source) |
75"x3" Planar Magnetic per channel |
| Drivers (Low Frequency Regenerator) |
Four 12" Underhung 3" coil LFR per channel |
| Line Source Driver Weight |
43 lbs. each channel |
| Low Frequency Magnet Weight |
152 lbs. each channel |
| Frequency Response |
10-25,000 Hz +3db |
| Horizontal Dispersion |
Over 130 degrees |
| Vertical Dispersion |
6' Line Source |
| Sensitivity 1W/1M Equivalent |
91dB Equivalent Ratio |
| Line Source (Nominal Impedance) |
5.5 ohms |
| Line Source (Minimum Impedance) |
5.5 ohms |
| Low Frequency Regenerator Impedance |
Choice of 2, 4 or 6 ohms |
| Active Crossover Point |
Normal setting 140 Hz |
| Passive Components |
None |
| Required Channels of Amplification |
4 (Up to 6 or 10 as an option) |
| Max. Power Handling (Line Source) |
1250 watts per channel |
| Max. Power Handling (Low Frequency Regenerator) |
4000 watts per channel |
| Recommended Amplifier Power (Line Source) |
200-625 watts per channel |
| Recommended Amplifier Power (Low Frequency Regenerator) |
200-2000 watts per channel |
| Complete System Weight |
4-piece system /1400lbs Approx |
| Line Source Cabinet (H" x W") |
80" x 7" (base 18"W x 31"D) |
| Low Frequency Cabinet (H" x W" x D") |
80" x 7" (base 18"W x 31"D) |
|